This ceramic tumbler media is for the medium step of polishing after you get rid of the CNC machining mark at the first stage.
This step is going to help you smooth the surface if you’re going to do a mirror-like finishing.
Dimension 4*4 mm
Add to the grinding machine, used for polishing and polishing the surface treatment of hardware, electronics, plastics and other products.
Step 2: Smoothing After the surface has been cut down it needs to be smoothened and prepared for the polishing stage. This is achieved using media 4*4mm and compound. The time needed to carry out this process can vary from 15 to 30 minutes.
Zirconia concentration weight % : 36%
Physical and chemical properties
Appearance: Conical solid
Odor: Weak odor
Flammability (solid or gas): Non-flammable.
Disposal considerations: Recycle as many as possible
Waste chemicals: Contaminated packaging: Residual hazards may still exist after the contents of the packaging are emptied. Keep away from heat and sources of ignition. If possible, recycle them to the supplier for recycling.
United Nations Dangerous Goods Number (UN No.): The product is not dangerous
Disposal considerations: Refer to the “Disposal” section.
Achieving the highly polished finish of the wheel hub can go through 3 processing steps:
Step 1: The coarse grinding wheel uses 6*6mm concentrated cleaner and polishing agent media for the grinding process. Depending on the initial condition of the surface, treatment time may take 0.5 to 2 hours.
Step 2: Smoothing After the surface has been cut, it needs to be smoothed and prepared for the polishing stage. This is achieved using 4*4mm media and composite materials. The time required to perform this process may vary from 15 minutes to 30 minutes.
Step 3: Polishing The final stage consists of polishing the wheel using 2*3mm media and compound. Processing time may take 6 to 15 minutes. This medium is ideal for achieving a bright, highly polished surface.
*This is only a guideline, the duration of the finishing process may depend on the initial condition of the wheel.
** The size and shape of the media will be selected to fit the part geometry and avoid any media entrapment.
***Some wheels may only require the last 2 stages depending on initial surface condition.
Fine Polishing Ceramic balls 2*2mm for bright and chrome finishing
Ceramic Wheel Rim Polishing Media for Medium Smoothing Polishing
Chemical Compound For Ceramic Wheel Polishing Machine
How to Choose a Ceramic Rim Polishing Machine?
Traditional Manual Polishing vs. Vibratory Machine vs. Rotary Machine Polishing
